How To Prevent Nail Pops In Drywall

Builder Insights / Blog

Tips for Preventing Nail Pops in Drywall

Nail or screw pops occur from time to time. The boilerplate house has almost 25,000 to 35,000 fasteners, then a dozen screw pops is normal, simply when you lot're getting hundreds, y'all take a serious problem and a very expensive callback. Here are some construction tips to help forbid screw and boom pops so you save time and money.

Check your positioning: Screws not set in far plenty are easy to encounter and fix, but when screws are set also far in, they are harder to identify. The paper facing is really thin and the odd spiral gear up too deep won't show up easily, but volition pop with structural shifting. Cheque the depth of the screws and ensure that you are on point. If you're getting callbacks, check your crew's fastener positioning before taping and mud.

Utilize the right length screw: Your screws should exist hitting a depth of 5/8-inch to ¾-inch into the framing fellow member. In order to reach that, it's normal to employ ane-1/4 inch screws when attaching ½-inch and v/8-inch drywall. Screws that are also long are harder to bulldoze straight. As the framing swells and shrinks with ambient moisture, screws that are too long are more probable to pop.

Don't overdo information technology: More than screws aren't necessarily better—every 16 inches is standard with one fastener in each corner, and two in the field. Piece of work across the panel lengthwise to pull the drywall closer to the framing.

Control your environment: Shop your drywall onsite in the home. Turn on the HVAC arrangement during this time so that the drywall tin acclimate to the habitation'south surroundings. Test your drywall to ensure that the wet content is around fourteen% with the framing less before hanging. Continue humidity depression while taping.

Use drywall adhesive: Always use an approved adhesive to foreclose nail and screw pops.