How To Use A Nail Punch

3 Ways to Punch a Pigsty in a Leather Belt

Become out your leather hole punch, 'cause sooner or later, you're gonna take to practice it. Information technology may be considering you lost a fiddling weight, and now it's fourth dimension to notch over 1 more, and you're plumb out of holes. Maybe information technology'll be due to the fact that different pairs of pants sit down on your trunk at unlike places. Or it may be that you lot've simply had that belt for a piddling while, and the leather has stretched a flake. But, at some indicate, you lot're gonna accept to brand a hole in a belt. And if you do it correct, it can look perfectly in line with the others, like it'southward been there the unabridged time.

No matter which of the techniques below you lot opt for, 90% of your success volition exist adamant not past how the hole gets there, merely by where you put it in the get-go place. In most men's belts, the holes are spaced at a perfect one inch, making your chore plenty like shooting fish in a barrel. Only apply a ruler to set up a horizontal straight edge by making sure information technology crosses each hole at the aforementioned point, and marking on the back.

Or, if yous're crazy obsessive (I am), you lot can make a little template with some painter's tape. Just utilise the existing holes to marker their placement, then shift the whole thing downwards past one. Hold it up to the calorie-free to brand certain your dots are placed right in the center.

Pick #1: Make a Belt Pigsty Using an Awl (or Boom)

If you have at least a medium-ly equipped toolbox, y'all'll definitely have a hammer or mallet. And you lot may have an awl, which is (basically) a metal bespeak with a handle. It's like to an ice pick, which yous could just as hands apply. If you lot don't accept an awl, get one! They're like $two.00, and you'll find uses for them in all sorts of woods, paper, leather, and fabric projects. Or, try a large blast.

In that location's non much to it: Mark your spot, and identify your chugalug on some flake wood. Use short firm strokes to slowly insert the sharp point into the material, driving it all the way through until y'all've reached the thickness of the metal that corresponds to the size of your holes. Which is another argument for the awl over the nail, as the tool is evenly tapered along its length.

Option #2: Using A Power Drill to Add a Hole

If you take your time, and kickoff the hole well, you tin drill through leather with fairly clean results.

The trick will exist to make the right sized hole, so examination by inserting the solid ends of your drill $.25 until you've selected only the right one. You'll have the best results if you lot can start the hole cleanly. If you lot have brad-betoken bits, yous'll definitely want to opt for those over metal tapping bits. If not, brand a significant dimple where you desire your hole with a nail or sharp knife, and employ that to keep the flake in place.

Option #iii: Apply a Leather Hole Punch

This designated tool is by far the nigh ideal option. You can detect them easily, and they're great to have effectually. This is the one I utilise.

These revolving punch pliers (sometimes call a leather hole puncher) have a bike of multiple sizes to punch round holes in pretty thick material. The tension springs make it easy to punch by hand. Seriously for the price of a nice lunch…this is a good investment to have around.

If your belt has an oval shape or elongated holes, I'thousand guessing you could use this tool to create the 2 round corners and then cut out the middle with a arts and crafts knife. Only even I'm non that obsessive. A well-space round hole will practice you only fine.

If you liked this postal service, please consider sharing it on Pinterest. Here's a handy paradigm just for that (cheers!):